Start with your bills: what a year of utility bills tells you

Hand reaching toward an edge computing interface

Meters and sensors give the detail, but the first answers are usually in a folder you already have: last year’s utility bills. Read together, they show the shape of your consumption and the months that cost more than they should.

Put the year side by side

Collect twelve months of electricity, natural gas or heating oil, and water bills. Write down for each month the consumption (kWh, litres, cubic metres), not just the amount paid, because tariffs change and hide the trend.

Divide by what drives the use

  • For a hotel, divide by occupied room-nights.
  • For offices, by working days or occupied floor area.
  • For a factory, by units produced or hours of operation.

A month where consumption per occupied room, per working day or per unit jumps is where to look first.

Read the base load

The lowest months show what the building uses when almost nothing is happening. A high base load points to plant that never switches off: pumps, ventilation, cold rooms or IT running around the clock.

Compare the price, not only the quantity

Work out the average price per kWh each month. If it rises while consumption falls, the tariff or the time of use is the problem, not the building.

Then decide where to measure

The bills tell you which months and which energy carrier to look at. Sub-meters on those loads then show which system is responsible, and prove the saving once you act.

With Cynergy Start you upload your bills and we extract the consumption and show the trend, per month and per occupied room, before any hardware is installed.