Energy audits and ISO 50001: the 2026 and 2027 deadlines

Hand holding a glowing light bulb inside a network of points

The recast Energy Efficiency Directive, Directive (EU) 2023/1791, changed who has to run energy audits and energy management systems. The test is no longer company size: it is how much energy you use.

The two thresholds

  • Average annual energy consumption above 85 TJ over the previous three years (about 23.6 GWh): implement an energy management system, certified by an independent body, by 11 October 2027. ISO 50001 is the usual route.
  • Above 10 TJ (about 2.8 GWh) without such a system: carry out an energy audit by 11 October 2026, repeat it at least every four years, and draw up an action plan from its recommendations.

Consumption covers all energy carriers: electricity, gas, heating oil and fuels. A hotel group, a factory or a portfolio of commercial buildings can pass 10 TJ sooner than expected.

ISO 14001 and ISO 50001

A certified energy management system meets the requirement at both thresholds. A certified environmental management system such as ISO 14001 can exempt a company from the audit if it includes an energy audit that meets the directive’s criteria.

What makes the audit and the system work

Both depend on data. An audit built on twelve monthly bills finds the obvious; one built on sub-metered, hourly data finds where the energy actually goes and proves the savings afterwards. An ISO 50001 system needs the same: energy performance indicators, a baseline and continuous measurement.

  • Confirm your three-year average consumption across all sites and carriers.
  • Check the Greek implementing rules for the deadlines and who may carry out the audit.
  • Put meters on the largest loads before the audit, so its findings rest on measured data.

Our energy and sustainability management service uses an EMS platform designed around ISO 50001, 50002 and 50006, with the KPIs, baselines and reports these processes ask for.

Sources